LC800-UG
CAPACITY
-
B 1100m (3600ft)
-
N 800m (2600ft)
-
H 600m (1950ft)
Drilling capacity is based on a 45-90º hole.
POWER PACK
-
Electric Motor 100HP - 1800RPM
-
Main Pump 32GPM - 3300PSI
-
Auxiliary Pumps 12GPM - 3300PSI
-
Feed Pump 4.3GPM - 2800PSI
-
Hydraulic Tank 40 GL
-
Cooling Water Cooled
DRILL HEAD
-
Motor Displacement 107cc
-
Maximun 1300rpm
Speed/Torque is continuously variable between
maximum and minimum values. More torque is
available in reverse for rod breaking
WIRELINE HOIST
-
Cable Capacity 3/16" - 1100m (3600ft)
The wireline winch is manufactured out of steel
and is driven by a low speed, high torque hydraulic
motor.
CAPACITYHYDRAULIC CHUCK AND FOOTCLAMP
-
Holding capacity 26.000lbs (11.790kg)
-
Max rod size (chuck) H - 3 1/2" (89mm)
-
Chuck operation Spring closed and hydraulicaly hidraulicaly opened
-
Final drive Gear driven
-
Hydraulic motor 107cc variable displacement
-
Transmision Hi-Lo 2 speed manual
-
Gear ratio High: 3.0:1 - Low: 5.4:1
-
Lubrication Pumped oil, filter and cooler
-
Fabrication Steel
-
Speed Variable - Up to 1.500RPM
-
Max rod size (clamp) P - 4 5/8" (117mm)
DRILL SLIDE AND FEED CYLINDER
-
Maximum pull 29000lb @ 3500PSI
13100kg @ 3500PSI -
Stroke 47 1/4" (1.2m)
