Duralite Diamond Drilling Machines are built with top quality materials, designed to be durable and lightweight. All components of this drill have been designed with the maximum safety for the user in mind. Special care and priority has been given to the size and weight of each component to allow disassembly, transport and reassembly of the drilling machine in the most efficient way possible.

The total weight of the Duralite 500BMP equipment in operational form is only. 5,735lbs (2,607 kg). approximately.


B 2 3/16” (55.6 MM) 1,625 FT (500 M)

∗These depth values ​​are based on ideal penetration conditions at 90 ° and on horizontal terrain; The variation of these values ​​will depend on the drilling tools used in ground conditions, drilling techniques and equipment utilization.


4 x kubota 40HP at 2,500 RPM (160HP Total)


The lifting cable is made of aluminum, equipped with a motor that drives it at low speed and delivers a high hydraulic torque allowing variable speeds.

Cable Dimension: 3/16” (4.88 MM): 3,000’ (914 M)

Lifting Capacity: 2,000 LBS (907KG)


Cable Dimension: 5/16”: 100’ (30.5M)

Lifting Capacity: 300 LBS (136KG)


The hydraulic system provided by Duralite that has already been tested is of the open center type that includes a pond with a venting system; The components used in the construction of this system such as pumps, valves and accessories are all top quality. This hydraulic system is capable of delivering 61 GPM at 2,500 RPM.


The feeding base is constructed with aluminum beams of the double T type. The movable base where the drill head is mounted is also made of aluminum. The base of the tower is constructed with double T aluminum beams and reinforced with type C aluminum beams. All articulated points are constructed of stainless steel.


  • Engine 1 (with sur dor) 475 Lbs.
  • Engine 2 (with sur dor) 475 Lbs.
  • Engine 3 (with sur dor) 475 Lbs.
  • Engine 4 (with doble sur dor) 505 Lbs.
  • Motor base 1 & 2 (with batteries) 200 Lbs.
  • Base engine 3 & 4 (with batteries) 200 Lbs.
  • Hydraulic tank (with grab bars) 445 Lbs.
  • Hydraulic packing valve 420 Lbs.
  • Tower Base (with ½ hinge) 325 Lbs.
  • Feeder base (with ½ hinge) 360 Lbs.
  • Tower (with pulleys) 280 Lbs.
  • Winch (with 2000 ’cable) 275 Lbs.
  • Tube holder 340 Lbs.
  • 300 head (with motor and hoses) 375 Lbs.
  • Fuel tank (empty) 150 Lbs.
  • Protective rotor guard 45 Lbs.
  • Anchor bars (set of 2) 110 Lbs.
  • Pra ssoli pressure pump 280 Lbs.

    (Si lo equipa con “FMC 435” agregar 260 lbs)