DURALITE DL-1000
GENERAL DESCRIPTION
Duralite Diamond Drilling Machines are built only with top quality materials, designed to be durable and lightweight. All components of this drill have been designed with the maximum safety for the user in mind. Special care and priority has been given to the size and weight of each component to allow disassembly, transport and reassembly of the drilling machine in the most efficient way possible.
The total weight of the Duralite 1000N equipment in operational form is approximately 4,426 kg. (9,755 lbs).
PRODUCTIVITY
∗The diamond drilling depth that can be achieved in this equipment will depend on the drilling diameter:
-
B 2 3/16" (55,6 mm) 5,850 ft (1,800 m)
-
N 2 3/4" (69.9 mm) 4,875 ft (1,500 m)
-
H 3 1/2" (88.9 mm) 2,559 ft (780 m)
∗These depth values are based on ideal penetration conditions at 90 ° and on horizontal terrain; The variation of these values will depend on the drilling tools used, ground conditions, drilling techniques and equipment utilization.
COMBUSTION ENGINE
John Deere 170 hp and 2,200 rpm standard tanker
WINCH FOR STEEL CABLE (WITH PROTECTIONS)
Cable Dimension: 3/16” (4.88 mm): 4,500′ de largo (1,372 m)
Lifting Capacity: 2,000 lbs (907 kg)
El cabrestante del cable de acero está fabricado de aluminio, está provisto con un motor que provee una velocidad variable que lo impulsa a baja velocidad y entrega un alto torque hidráulico.
FOR HANDLING TUBES (WITH PROTECTIONS):
Cable Dimension: 3/8″ de diámetro (9.76 mm)
Lifting Capacity: 300 lbs (136 kg)
HYDRAULIC MODULE
The hydraulic system provided by Duralite that has already been tested is from the open center which includes a pond with a venting system; The components used in the construction of this system such as pumps, valves and accessories are all top quality. This hydraulic system is capable of delivering 62 GPM at 2,200 RPM.
POWER BASE
The feeding base is constructed with aluminum beams of the double T type. The movable base where the drill head is mounted is also made of aluminum. The base of the tower is constructed with double T aluminum beams and reinforced with type C aluminum beams. All articulated points are constructed of stainless steel.
-
Head Displacement: 1.52 mts (60 inches)
-
Lifting Capacity 25,000 lbs @ 3,500 PSI
-
Angular Perforation Range: 40° a 90°
ROTATING HEAD, TOOL HOLDER AND TUBE HANDLER:
-
Lifting Capacity 26000 lbs (11,790 kg)
-
Pipe diameter 3.5" (89 mm)
-
Tool holder operation Spring system to close jaws
and hydraulic system to open jaws. -
Hydraulic engine Variable (160 cc)
-
Force transmission Gearbox
-
Type of transmission Two speed manual (high and low)
-
Change ratio: high 3.1:1 / low 5.4:1
-
Lubrication: Oil pump, filter and cooler
-
Fabrication: Steel
-
Speed: Variable up to 1,250 rpm
WEIGHT:
-
Power unit with protections 1175 lbs.
-
Hydraulic Module 1590 lbs
-
Feeding frame 1240 lbs.
-
Tower base with winches and without cable 820 lbs.
-
Rigid anchor arms and tower 1480 lbs.
-
Drilling head assembly
with motor and hydraulic hoses 1100 lbs. -
Tube manipulator assembly 230 lbs.
-
Fiberglass floors 880 lbs.
-
Core beams 700 lbs.
-
TOTAL WEIGHT APPROX. 9755 lbs.
